MyViet IDI Corporation
– Cánh khuấy TurboMix™ – Mô tả công nghệ – Giới thiệu chung và một vài số thông số liên quan TurboMix™ agitators designed for all kind of fibers in chests and storage towers up to a consistency of 5% Highly and effective agitation at low power consumption All parts in contact with stock made…
Mô tả công nghệ – Giới thiệu chung: The Andritz Hydrodrain (HYD) is a gravity thickener with high throughput at a minimum of floor space required. The suspension is pumped to the vat with a consistency of 0.80 to 2.5%, where it moves concurrent with the rotation of the disks to an adjustable outlet-weir. The…
– Máy nghiền bột giấy TwinFlo™ Refiner – Giới thiệu chung: Andritz is one of the market leaders in low consistency refining. Based on experience over several decades the current TwinFlo was developed. The TF refiner is well accepted in the P&P industry and has been sold several hundred times during the last years. Nomenclature…
– Thiết bị phối trộn CompaDis™ Disperger – Giới thiệu: The new Andritz disperger CompaDis™ is based on the experience and knowledge of building several hundred of HC-refiners, chemical mixers and other dispergers. The best parts of these machines where combined to build a new generation of disperger. The main advantage is the integrated heating…
– Mô tả công nghệ – Mô tả nguyên lý hoạt động: The disc filter is a vacuum filter. The vacuum is generated by drop legs. The stock is pumped to the inlet box through the feed section. The stock flows over the overflow section (counter current to disc direction). The level is adjusted via…
– Mô tả công nghệ – Giới thiệu: Andritz is one of the leading suppliers of complete systems for deinked pulp. As far as flotation is concerned extensive know how exists basing on the huge experience since Andritz installed fist DIP line in 1978. Since July 2002 Andritz has been supplying an own new flotation…
LỌC THÔ BẰNG SÀNG ÁP LỰC MODUScreen CR 1. Giới thiệu: Recycled paper raw material contains a lot of different type of harmful material (glass, sand, staples, plastic, metal, styro foam etc.) that need to be removed from the pulp. Normal system (conventional) for this is High Density Cleaners and hole screening with 1,4 to…
1. Mô tả công nghệ Cleaners have been used for a long time in the pulp and paper processes. Cleaners are used in pulp lines as well as in paper and board machine approach systems. Cleaner removes particles from suspension, which affect paper quality or cause excessive wear in subsequent processing machinery. These contaminants may…
Mô tả công nghệ Giới thiệu: Feeding systems are installed in front of HC and LC pulpers as well as in front of drum pulpers. They are consists of minimal one conveyor, up to several conveyors if needed due to the lay out or raw material balance. Andritz is not manufacturing feeding conveyors; they will…
